Generated on Fri May 11 13:27:14 -0400 2007 with rcov 0.8.0
Code reported as executed by Ruby looks like this... and this: this line is also marked as covered. Lines considered as run by rcov, but not reported by Ruby, look like this, and this: these lines were inferred by rcov (using simple heuristics). Finally, here's a line marked as not executed.
| Name | Total lines | Lines of code | Total coverage | Code coverage | ||||||||
| /home/blindaue/rpm/BUILD/rcov-0.8.0.2/lib/rcov.rb | 976 | 595 |
|
|
1 # rcov Copyright (c) 2004-2006 Mauricio Fernandez <mfp@acm.org> 2 # 3 # See LEGAL and LICENSE for licensing information. 4 5 # NOTE: if you're reading this in the XHTML code coverage report generated by 6 # rcov, you'll notice that only code inside methods is reported as covered, 7 # very much like what happens when you run it with --test-unit-only. 8 # This is due to the fact that we're running rcov on itself: the code below is 9 # already loaded before coverage tracing is activated, so only code inside 10 # methods is actually executed under rcov's inspection. 11 12 require 'rcov/version' 13 14 SCRIPT_LINES__ = {} unless defined? SCRIPT_LINES__ 15 16 module Rcov 17 18 # Rcov::CoverageInfo is but a wrapper for an array, with some additional 19 # checks. It is returned by FileStatistics#coverage. 20 class CoverageInfo 21 def initialize(coverage_array) 22 @cover = coverage_array.clone 23 end 24 25 # Return the coverage status for the requested line. There are four possible 26 # return values: 27 # * nil if there's no information for the requested line (i.e. it doesn't exist) 28 # * true if the line was reported by Ruby as executed 29 # * :inferred if rcov inferred it was executed, despite not being reported 30 # by Ruby. 31 # * false otherwise, i.e. if it was not reported by Ruby and rcov's 32 # heuristics indicated that it was not executed 33 def [](line) 34 @cover[line] 35 end 36 37 def []=(line, val) # :nodoc: 38 unless [true, false, :inferred].include? val 39 raise RuntimeError, "What does #{val} mean?" 40 end 41 return if line < 0 || line >= @cover.size 42 @cover[line] = val 43 end 44 45 # Return an Array holding the code coverage information. 46 def to_a 47 @cover.clone 48 end 49 50 def method_missing(meth, *a, &b) # :nodoc: 51 @cover.send(meth, *a, &b) 52 end 53 end 54 55 # A FileStatistics object associates a filename to: 56 # 1. its source code 57 # 2. the per-line coverage information after correction using rcov's heuristics 58 # 3. the per-line execution counts 59 # 60 # A FileStatistics object can be therefore be built given the filename, the 61 # associated source code, and an array holding execution counts (i.e. how many 62 # times each line has been executed). 63 # 64 # FileStatistics is relatively intelligent: it handles normal comments, 65 # <tt>=begin/=end</tt>, heredocs, many multiline-expressions... It uses a 66 # number of heuristics to determine what is code and what is a comment, and to 67 # refine the initial (incomplete) coverage information. 68 # 69 # Basic usage is as follows: 70 # sf = FileStatistics.new("foo.rb", ["puts 1", "if true &&", " false", 71 # "puts 2", "end"], [1, 1, 0, 0, 0]) 72 # sf.num_lines # => 5 73 # sf.num_code_lines # => 5 74 # sf.coverage[2] # => true 75 # sf.coverage[3] # => :inferred 76 # sf.code_coverage # => 0.6 77 # 78 # The array of strings representing the source code and the array of execution 79 # counts would normally be obtained from a Rcov::CodeCoverageAnalyzer. 80 class FileStatistics 81 attr_reader :name, :lines, :coverage, :counts 82 def initialize(name, lines, counts, comments_run_by_default = false) 83 @name = name 84 @lines = lines 85 initial_coverage = counts.map{|x| (x || 0) > 0 ? true : false } 86 @coverage = CoverageInfo.new initial_coverage 87 @counts = counts 88 @is_begin_comment = nil 89 # points to the line defining the heredoc identifier 90 # but only if it was marked (we don't care otherwise) 91 @heredoc_start = Array.new(lines.size, false) 92 @multiline_string_start = Array.new(lines.size, false) 93 extend_heredocs 94 find_multiline_strings 95 precompute_coverage comments_run_by_default 96 end 97 98 # Merge code coverage and execution count information. 99 # As for code coverage, a line will be considered 100 # * covered for sure (true) if it is covered in either +self+ or in the 101 # +coverage+ array 102 # * considered <tt>:inferred</tt> if the neither +self+ nor the +coverage+ array 103 # indicate that it was definitely executed, but it was <tt>inferred</tt> 104 # in either one 105 # * not covered (<tt>false</tt>) if it was uncovered in both 106 # 107 # Execution counts are just summated on a per-line basis. 108 def merge(lines, coverage, counts) 109 coverage.each_with_index do |v, idx| 110 case @coverage[idx] 111 when :inferred 112 @coverage[idx] = v || @coverage[idx] 113 when false 114 @coverage[idx] ||= v 115 end 116 end 117 counts.each_with_index{|v, idx| @counts[idx] += v } 118 precompute_coverage false 119 end 120 121 # Total coverage rate if comments are also considered "executable", given as 122 # a fraction, i.e. from 0 to 1.0. 123 # A comment is attached to the code following it (RDoc-style): it will be 124 # considered executed if the the next statement was executed. 125 def total_coverage 126 return 0 if @coverage.size == 0 127 @coverage.inject(0.0) {|s,a| s + (a ? 1:0) } / @coverage.size 128 end 129 130 # Code coverage rate: fraction of lines of code executed, relative to the 131 # total amount of lines of code (loc). Returns a float from 0 to 1.0. 132 def code_coverage 133 indices = (0...@lines.size).select{|i| is_code? i } 134 return 0 if indices.size == 0 135 count = 0 136 indices.each {|i| count += 1 if @coverage[i] } 137 1.0 * count / indices.size 138 end 139 140 # Number of lines of code (loc). 141 def num_code_lines 142 (0...@lines.size).select{|i| is_code? i}.size 143 end 144 145 # Total number of lines. 146 def num_lines 147 @lines.size 148 end 149 150 # Returns true if the given line number corresponds to code, as opposed to a 151 # comment (either # or =begin/=end blocks). 152 def is_code?(lineno) 153 unless @is_begin_comment 154 @is_begin_comment = Array.new(@lines.size, false) 155 pending = [] 156 state = :code 157 @lines.each_with_index do |line, index| 158 case state 159 when :code 160 if /^=begin\b/ =~ line 161 state = :comment 162 pending << index 163 end 164 when :comment 165 pending << index 166 if /^=end\b/ =~ line 167 state = :code 168 pending.each{|idx| @is_begin_comment[idx] = true} 169 pending.clear 170 end 171 end 172 end 173 end 174 @lines[lineno] && !@is_begin_comment[lineno] && 175 @lines[lineno] !~ /^\s*(#|$)/ 176 end 177 178 private 179 180 def find_multiline_strings 181 state = :awaiting_string 182 wanted_delimiter = nil 183 string_begin_line = 0 184 @lines.each_with_index do |line, i| 185 matching_delimiters = Hash.new{|h,k| k} 186 matching_delimiters.update("{" => "}", "[" => "]", "(" => ")") 187 case state 188 when :awaiting_string 189 # very conservative, doesn't consider the last delimited string but 190 # only the very first one 191 if md = /^[^#]*%(?:[qQ])?(.)/.match(line) 192 wanted_delimiter = /(?!\\).#{Regexp.escape(matching_delimiters[md[1]])}/ 193 # check if closed on the very same line 194 # conservative again, we might have several quoted strings with the 195 # same delimiter on the same line, leaving the last one open 196 unless wanted_delimiter.match(md.post_match) 197 state = :want_end_delimiter 198 string_begin_line = i 199 end 200 end 201 when :want_end_delimiter 202 @multiline_string_start[i] = string_begin_line 203 if wanted_delimiter.match(line) 204 state = :awaiting_string 205 end 206 end 207 end 208 end 209 210 def precompute_coverage(comments_run_by_default = true) 211 changed = false 212 lastidx = lines.size - 1 213 if (!is_code?(lastidx) || /^__END__$/ =~ @lines[-1]) && !@coverage[lastidx] 214 # mark the last block of comments 215 @coverage[lastidx] ||= :inferred 216 (lastidx-1).downto(0) do |i| 217 break if is_code?(i) 218 @coverage[i] ||= :inferred 219 end 220 end 221 (0...lines.size).each do |i| 222 next if @coverage[i] 223 line = @lines[i] 224 if /^\s*(begin|ensure|else|case)\s*(?:#.*)?$/ =~ line && next_expr_marked?(i) or 225 /^\s*(?:end|\})\s*(?:#.*)?$/ =~ line && prev_expr_marked?(i) or 226 /^\s*(?:end\b|\})/ =~ line && prev_expr_marked?(i) && next_expr_marked?(i) or 227 /^\s*rescue\b/ =~ line && next_expr_marked?(i) or 228 /(do|\{)\s*(\|[^|]*\|\s*)?(?:#.*)?$/ =~ line && next_expr_marked?(i) or 229 prev_expr_continued?(i) && prev_expr_marked?(i) or 230 comments_run_by_default && !is_code?(i) or 231 /^\s*((\)|\]|\})\s*)+(?:#.*)?$/ =~ line && prev_expr_marked?(i) or 232 prev_expr_continued?(i+1) && next_expr_marked?(i) 233 @coverage[i] ||= :inferred 234 changed = true 235 end 236 end 237 (@lines.size-1).downto(0) do |i| 238 next if @coverage[i] 239 if !is_code?(i) and @coverage[i+1] 240 @coverage[i] = :inferred 241 changed = true 242 end 243 end 244 245 extend_heredocs if changed 246 247 # if there was any change, we have to recompute; we'll eventually 248 # reach a fixed point and stop there 249 precompute_coverage(comments_run_by_default) if changed 250 end 251 252 require 'strscan' 253 def extend_heredocs 254 i = 0 255 while i < @lines.size 256 unless is_code? i 257 i += 1 258 next 259 end 260 #FIXME: using a restrictive regexp so that only <<[A-Z_a-z]\w* 261 # matches when unquoted, so as to avoid problems with 1<<2 262 # (keep in mind that whereas puts <<2 is valid, puts 1<<2 is a 263 # parse error, but a = 1<<2 is of course fine) 264 scanner = StringScanner.new(@lines[i]) 265 j = k = i 266 loop do 267 scanned_text = scanner.search_full(/<<(-?)(?:(['"`])((?:(?!\2).)+)\2|([A-Z_a-z]\w*))/, 268 true, true) 269 # k is the first line after the end delimiter for the last heredoc 270 # scanned so far 271 unless scanner.matched? 272 i = k 273 break 274 end 275 term = scanner[3] || scanner[4] 276 # try to ignore symbolic bitshifts like 1<<LSHIFT 277 ident_text = "<<#{scanner[1]}#{scanner[2]}#{term}#{scanner[2]}" 278 if scanned_text[/\d+\s*#{Regexp.escape(ident_text)}/] 279 # it was preceded by a number, ignore 280 i = k 281 break 282 end 283 must_mark = [] 284 end_of_heredoc = (scanner[1] == "-") ? 285 /^\s*#{Regexp.escape(term)}$/ : /^#{Regexp.escape(term)}$/ 286 loop do 287 break if j == @lines.size 288 must_mark << j 289 if end_of_heredoc =~ @lines[j] 290 must_mark.each do |n| 291 @heredoc_start[n] = i 292 end 293 if (must_mark + [i]).any?{|lineidx| @coverage[lineidx]} 294 @coverage[i] ||= :inferred 295 must_mark.each{|lineidx| @coverage[lineidx] ||= :inferred} 296 end 297 # move the "first line after heredocs" index 298 k = (j += 1) 299 break 300 end 301 j += 1 302 end 303 end 304 305 i += 1 306 end 307 end 308 309 def next_expr_marked?(lineno) 310 return false if lineno >= @lines.size 311 found = false 312 idx = (lineno+1).upto(@lines.size-1) do |i| 313 next unless is_code? i 314 found = true 315 break i 316 end 317 return false unless found 318 @coverage[idx] 319 end 320 321 def prev_expr_marked?(lineno) 322 return false if lineno <= 0 323 found = false 324 idx = (lineno-1).downto(0) do |i| 325 next unless is_code? i 326 found = true 327 break i 328 end 329 return false unless found 330 @coverage[idx] 331 end 332 333 def prev_expr_continued?(lineno) 334 return false if lineno <= 0 335 return false if lineno >= @lines.size 336 found = false 337 if @multiline_string_start[lineno] && 338 @multiline_string_start[lineno] < lineno 339 return true 340 end 341 # find index of previous code line 342 idx = (lineno-1).downto(0) do |i| 343 if @heredoc_start[i] 344 found = true 345 break @heredoc_start[i] 346 end 347 next unless is_code? i 348 found = true 349 break i 350 end 351 return false unless found 352 #TODO: write a comprehensive list 353 if is_code?(lineno) && /^\s*((\)|\]|\})\s*)+(?:#.*)?$/.match(@lines[lineno]) 354 return true 355 end 356 #FIXME: / matches regexps too 357 # the following regexp tries to reject #{interpolation} 358 r = /(,|\.|\+|-|\*|\/|<|>|%|&&|\|\||<<|\(|\[|\{|=|and|or|\\)\s*(?:#(?![{$@]).*)?$/.match @lines[idx] 359 # try to see if a multi-line expression with opening, closing delimiters 360 # started on that line 361 [%w!( )!].each do |opening_str, closing_str| 362 # conservative: only consider nesting levels opened in that line, not 363 # previous ones too. 364 # next regexp considers interpolation too 365 line = @lines[idx].gsub(/#(?![{$@]).*$/, "") 366 opened = line.scan(/#{Regexp.escape(opening_str)}/).size 367 closed = line.scan(/#{Regexp.escape(closing_str)}/).size 368 return true if opened - closed > 0 369 end 370 if /(do|\{)\s*\|[^|]*\|\s*(?:#.*)?$/.match @lines[idx] 371 return false 372 end 373 374 r 375 end 376 end 377 378 379 autoload :RCOV__, "rcov/lowlevel.rb" 380 381 class DifferentialAnalyzer 382 require 'thread' 383 @@mutex = Mutex.new 384 385 def initialize(install_hook_meth, remove_hook_meth, reset_meth) 386 @cache_state = :wait 387 @start_raw_data = data_default 388 @end_raw_data = data_default 389 @aggregated_data = data_default 390 @install_hook_meth = install_hook_meth 391 @remove_hook_meth= remove_hook_meth 392 @reset_meth= reset_meth 393 end 394 395 # Execute the code in the given block, monitoring it in order to gather 396 # information about which code was executed. 397 def run_hooked 398 install_hook 399 yield 400 ensure 401 remove_hook 402 end 403 404 # Start monitoring execution to gather information. Such data will be 405 # collected until #remove_hook is called. 406 # 407 # Use #run_hooked instead if possible. 408 def install_hook 409 @start_raw_data = raw_data_absolute 410 Rcov::RCOV__.send(@install_hook_meth) 411 @cache_state = :hooked 412 @@mutex.synchronize{ self.class.hook_level += 1 } 413 end 414 415 # Stop collecting information. 416 # #remove_hook will also stop collecting info if it is run inside a 417 # #run_hooked block. 418 def remove_hook 419 @@mutex.synchronize do 420 self.class.hook_level -= 1 421 Rcov::RCOV__.send(@remove_hook_meth) if self.class.hook_level == 0 422 end 423 @end_raw_data = raw_data_absolute 424 @cache_state = :done 425 # force computation of the stats for the traced code in this run; 426 # we cannot simply let it be if self.class.hook_level == 0 because 427 # some other analyzer could install a hook, causing the raw_data_absolute 428 # to change again. 429 # TODO: lazy computation of raw_data_relative, only when the hook gets 430 # activated again. 431 raw_data_relative 432 end 433 434 # Remove the data collected so far. Further collection will start from 435 # scratch. 436 def reset 437 @@mutex.synchronize do 438 if self.class.hook_level == 0 439 # Unfortunately there's no way to report this as covered with rcov: 440 # if we run the tests under rcov self.class.hook_level will be >= 1 ! 441 # It is however executed when we run the tests normally. 442 Rcov::RCOV__.send(@reset_meth) 443 @start_raw_data = data_default 444 @end_raw_data = data_default 445 else 446 @start_raw_data = @end_raw_data = raw_data_absolute 447 end 448 @raw_data_relative = data_default 449 @aggregated_data = data_default 450 end 451 end 452 453 protected 454 455 def data_default 456 raise "must be implemented by the subclass" 457 end 458 459 def self.hook_level 460 raise "must be implemented by the subclass" 461 end 462 463 def raw_data_absolute 464 raise "must be implemented by the subclass" 465 end 466 467 def aggregate_data(aggregated_data, delta) 468 raise "must be implemented by the subclass" 469 end 470 471 def compute_raw_data_difference(first, last) 472 raise "must be implemented by the subclass" 473 end 474 475 private 476 def raw_data_relative 477 case @cache_state 478 when :wait 479 return @aggregated_data 480 when :hooked 481 new_start = raw_data_absolute 482 new_diff = compute_raw_data_difference(@start_raw_data, new_start) 483 @start_raw_data = new_start 484 when :done 485 @cache_state = :wait 486 new_diff = compute_raw_data_difference(@start_raw_data, 487 @end_raw_data) 488 end 489 490 aggregate_data(@aggregated_data, new_diff) 491 492 @aggregated_data 493 end 494 495 end 496 497 # A CodeCoverageAnalyzer is responsible for tracing code execution and 498 # returning code coverage and execution count information. 499 # 500 # Note that you must <tt>require 'rcov'</tt> before the code you want to 501 # analyze is parsed (i.e. before it gets loaded or required). You can do that 502 # by either invoking ruby with the <tt>-rrcov</tt> command-line option or 503 # just: 504 # require 'rcov' 505 # require 'mycode' 506 # # .... 507 # 508 # == Example 509 # 510 # analyzer = Rcov::CodeCoverageAnalyzer.new 511 # analyzer.run_hooked do 512 # do_foo 513 # # all the code executed as a result of this method call is traced 514 # end 515 # # .... 516 # 517 # analyzer.run_hooked do 518 # do_bar 519 # # the code coverage information generated in this run is aggregated 520 # # to the previously recorded one 521 # end 522 # 523 # analyzer.analyzed_files # => ["foo.rb", "bar.rb", ... ] 524 # lines, marked_info, count_info = analyzer.data("foo.rb") 525 # 526 # In this example, two pieces of code are monitored, and the data generated in 527 # both runs are aggregated. +lines+ is an array of strings representing the 528 # source code of <tt>foo.rb</tt>. +marked_info+ is an array holding false, 529 # true values indicating whether the corresponding lines of code were reported 530 # as executed by Ruby. +count_info+ is an array of integers representing how 531 # many times each line of code has been executed (more precisely, how many 532 # events where reported by Ruby --- a single line might correspond to several 533 # events, e.g. many method calls). 534 # 535 # You can have several CodeCoverageAnalyzer objects at a time, and it is 536 # possible to nest the #run_hooked / #install_hook/#remove_hook blocks: each 537 # analyzer will manage its data separately. Note however that no special 538 # provision is taken to ignore code executed "inside" the CodeCoverageAnalyzer 539 # class. At any rate this will not pose a problem since it's easy to ignore it 540 # manually: just don't do 541 # lines, coverage, counts = analyzer.data("/path/to/lib/rcov.rb") 542 # if you're not interested in that information. 543 class CodeCoverageAnalyzer < DifferentialAnalyzer 544 @hook_level = 0 545 # defined this way instead of attr_accessor so that it's covered 546 def self.hook_level # :nodoc: 547 @hook_level 548 end 549 def self.hook_level=(x) # :nodoc: 550 @hook_level = x 551 end 552 553 def initialize 554 @script_lines__ = SCRIPT_LINES__ 555 super(:install_coverage_hook, :remove_coverage_hook, 556 :reset_coverage) 557 end 558 559 # Return an array with the names of the files whose code was executed inside 560 # the block given to #run_hooked or between #install_hook and #remove_hook. 561 def analyzed_files 562 update_script_lines__ 563 raw_data_relative.select do |file, lines| 564 @script_lines__.has_key?(file) 565 end.map{|fname,| fname} 566 end 567 568 # Return the available data about the requested file, or nil if none of its 569 # code was executed or it cannot be found. 570 # The return value is an array with three elements: 571 # lines, marked_info, count_info = analyzer.data("foo.rb") 572 # +lines+ is an array of strings representing the 573 # source code of <tt>foo.rb</tt>. +marked_info+ is an array holding false, 574 # true values indicating whether the corresponding lines of code were reported 575 # as executed by Ruby. +count_info+ is an array of integers representing how 576 # many times each line of code has been executed (more precisely, how many 577 # events where reported by Ruby --- a single line might correspond to several 578 # events, e.g. many method calls). 579 # 580 # The returned data corresponds to the aggregation of all the statistics 581 # collected in each #run_hooked or #install_hook/#remove_hook runs. You can 582 # reset the data at any time with #reset to start from scratch. 583 def data(filename) 584 raw_data = raw_data_relative 585 update_script_lines__ 586 unless @script_lines__.has_key?(filename) && 587 raw_data.has_key?(filename) 588 return nil 589 end 590 refine_coverage_info(@script_lines__[filename], raw_data[filename]) 591 end 592 593 # Execute the code in the given block, monitoring it in order to gather 594 # information about which code was executed. 595 def run_hooked; super end 596 597 # Start monitoring execution to gather code coverage and execution count 598 # information. Such data will be collected until #remove_hook is called. 599 # 600 # Use #run_hooked instead if possible. 601 def install_hook; super end 602 603 # Stop collecting code coverage and execution count information. 604 # #remove_hook will also stop collecting info if it is run inside a 605 # #run_hooked block. 606 def remove_hook; super end 607 608 # Remove the data collected so far. The coverage and execution count 609 # "history" will be erased, and further collection will start from scratch: 610 # no code is considered executed, and therefore all execution counts are 0. 611 # Right after #reset, #analyzed_files will return an empty array, and 612 # #data(filename) will return nil. 613 def reset; super end 614 615 def dump_coverage_info(formatters) # :nodoc: 616 update_script_lines__ 617 raw_data_relative.each do |file, lines| 618 next if @script_lines__.has_key?(file) == false 619 lines = @script_lines__[file] 620 raw_coverage_array = raw_data_relative[file] 621 622 line_info, marked_info, 623 count_info = refine_coverage_info(lines, raw_coverage_array) 624 formatters.each do |formatter| 625 formatter.add_file(file, line_info, marked_info, count_info) 626 end 627 end 628 formatters.each{|formatter| formatter.execute} 629 end 630 631 private 632 633 def data_default; {} end 634 635 def raw_data_absolute 636 Rcov::RCOV__.generate_coverage_info 637 end 638 639 def aggregate_data(aggregated_data, delta) 640 delta.each_pair do |file, cov_arr| 641 dest = (aggregated_data[file] ||= Array.new(cov_arr.size, 0)) 642 cov_arr.each_with_index{|x,i| dest[i] += x} 643 end 644 end 645 646 def compute_raw_data_difference(first, last) 647 difference = {} 648 last.each_pair do |fname, cov_arr| 649 unless first.has_key?(fname) 650 difference[fname] = cov_arr.clone 651 else 652 orig_arr = first[fname] 653 diff_arr = Array.new(cov_arr.size, 0) 654 changed = false 655 cov_arr.each_with_index do |x, i| 656 diff_arr[i] = diff = (x || 0) - (orig_arr[i] || 0) 657 changed = true if diff != 0 658 end 659 difference[fname] = diff_arr if changed 660 end 661 end 662 difference 663 end 664 665 666 def refine_coverage_info(lines, covers) 667 marked_info = [] 668 count_info = [] 669 lines.size.times do |i| 670 c = covers[i] 671 marked_info << ((c && c > 0) ? true : false) 672 count_info << (c || 0) 673 end 674 675 script_lines_workaround(lines, marked_info, count_info) 676 end 677 678 # Try to detect repeated data, based on observed repetitions in line_info: 679 # this is a workaround for SCRIPT_LINES__[filename] including as many copies 680 # of the file as the number of times it was parsed. 681 def script_lines_workaround(line_info, coverage_info, count_info) 682 is_repeated = lambda do |div| 683 n = line_info.size / div 684 break false unless line_info.size % div == 0 && n > 1 685 different = false 686 n.times do |i| 687 if (0...div).map{|j| line_info[i+j*n]}.uniq.size != 1 688 different = true 689 break 690 end 691 end 692 693 ! different 694 end 695 696 factors = braindead_factorize(line_info.size) 697 factors.each do |n| 698 if is_repeated[n] 699 line_info = line_info[0, line_info.size / n] 700 coverage_info = coverage_info[0, coverage_info.size / n] 701 count_info = count_info[0, count_info.size / n] 702 end 703 end if factors.size > 1 # don't even try if it's prime 704 705 [line_info, coverage_info, count_info] 706 end 707 708 def braindead_factorize(num) 709 return [0] if num == 0 710 return [-1] + braindead_factorize(-num) if num < 0 711 factors = [] 712 while num % 2 == 0 713 factors << 2 714 num /= 2 715 end 716 size = num 717 n = 3 718 max = Math.sqrt(num) 719 while n <= max && n <= size 720 while size % n == 0 721 size /= n 722 factors << n 723 end 724 n += 2 725 end 726 factors << size if size != 1 727 factors 728 end 729 730 def update_script_lines__ 731 @script_lines__ = @script_lines__.merge(SCRIPT_LINES__) 732 end 733 734 public 735 def marshal_dump # :nodoc: 736 # @script_lines__ is updated just before serialization so as to avoid 737 # missing files in SCRIPT_LINES__ 738 ivs = {} 739 update_script_lines__ 740 instance_variables.each{|iv| ivs[iv] = instance_variable_get(iv)} 741 ivs 742 end 743 744 def marshal_load(ivs) # :nodoc: 745 ivs.each_pair{|iv, val| instance_variable_set(iv, val)} 746 end 747 748 end # CodeCoverageAnalyzer 749 750 # A CallSiteAnalyzer can be used to obtain information about: 751 # * where a method is defined ("+defsite+") 752 # * where a method was called from ("+callsite+") 753 # 754 # == Example 755 # <tt>example.rb</tt>: 756 # class X 757 # def f1; f2 end 758 # def f2; 1 + 1 end 759 # def f3; f1 end 760 # end 761 # 762 # analyzer = Rcov::CallSiteAnalyzer.new 763 # x = X.new 764 # analyzer.run_hooked do 765 # x.f1 766 # end 767 # # .... 768 # 769 # analyzer.run_hooked do 770 # x.f3 771 # # the information generated in this run is aggregated 772 # # to the previously recorded one 773 # end 774 # 775 # analyzer.analyzed_classes # => ["X", ... ] 776 # analyzer.methods_for_class("X") # => ["f1", "f2", "f3"] 777 # analyzer.defsite("X#f1") # => DefSite object 778 # analyzer.callsites("X#f2") # => hash with CallSite => count 779 # # associations 780 # defsite = analyzer.defsite("X#f1") 781 # defsite.file # => "example.rb" 782 # defsite.line # => 2 783 # 784 # You can have several CallSiteAnalyzer objects at a time, and it is 785 # possible to nest the #run_hooked / #install_hook/#remove_hook blocks: each 786 # analyzer will manage its data separately. Note however that no special 787 # provision is taken to ignore code executed "inside" the CallSiteAnalyzer 788 # class. 789 # 790 # +defsite+ information is only available for methods that were called under 791 # the inspection of the CallSiteAnalyzer, i.o.w. you will only have +defsite+ 792 # information for those methods for which callsite information is 793 # available. 794 class CallSiteAnalyzer < DifferentialAnalyzer 795 # A method definition site. 796 class DefSite < Struct.new(:file, :line) 797 end 798 799 # Object representing a method call site. 800 # It corresponds to a part of the callstack starting from the context that 801 # called the method. 802 class CallSite < Struct.new(:backtrace) 803 # The depth of a CallSite is the number of stack frames 804 # whose information is included in the CallSite object. 805 def depth 806 backtrace.size 807 end 808 809 # File where the method call originated. 810 # Might return +nil+ or "" if it is not meaningful (C extensions, etc). 811 def file(level = 0) 812 stack_frame = backtrace[level] 813 stack_frame ? stack_frame[2] : nil 814 end 815 816 # Line where the method call originated. 817 # Might return +nil+ or 0 if it is not meaningful (C extensions, etc). 818 def line(level = 0) 819 stack_frame = backtrace[level] 820 stack_frame ? stack_frame[3] : nil 821 end 822 823 # Name of the method where the call originated. 824 # Returns +nil+ if the call originated in +toplevel+. 825 # Might return +nil+ if it could not be determined. 826 def calling_method(level = 0) 827 stack_frame = backtrace[level] 828 stack_frame ? stack_frame[1] : nil 829 end 830 831 # Name of the class holding the method where the call originated. 832 # Might return +nil+ if it could not be determined. 833 def calling_class(level = 0) 834 stack_frame = backtrace[level] 835 stack_frame ? stack_frame[0] : nil 836 end 837 end 838 839 @hook_level = 0 840 # defined this way instead of attr_accessor so that it's covered 841 def self.hook_level # :nodoc: 842 @hook_level 843 end 844 def self.hook_level=(x) # :nodoc: 845 @hook_level = x 846 end 847 848 def initialize 849 super(:install_callsite_hook, :remove_callsite_hook, 850 :reset_callsite) 851 end 852 853 # Classes whose methods have been called. 854 # Returns an array of strings describing the classes (just klass.to_s for 855 # each of them). Singleton classes are rendered as: 856 # #<Class:MyNamespace::MyClass> 857 def analyzed_classes 858 raw_data_relative.first.keys.map{|klass, meth| klass}.uniq.sort 859 end 860 861 # Methods that were called for the given class. See #analyzed_classes for 862 # the notation used for singleton classes. 863 # Returns an array of strings or +nil+ 864 def methods_for_class(classname) 865 a = raw_data_relative.first.keys.select{|kl,_| kl == classname}.map{|_,meth| meth}.sort 866 a.empty? ? nil : a 867 end 868 alias_method :analyzed_methods, :methods_for_class 869 870 # Returns a hash with <tt>CallSite => call count</tt> associations or +nil+ 871 # Can be called in two ways: 872 # analyzer.callsites("Foo#f1") # instance method 873 # analyzer.callsites("Foo.g1") # singleton method of the class 874 # or 875 # analyzer.callsites("Foo", "f1") 876 # analyzer.callsites("#<class:Foo>", "g1") 877 def callsites(classname_or_fullname, methodname = nil) 878 rawsites = raw_data_relative.first[expand_name(classname_or_fullname, methodname)] 879 return nil unless rawsites 880 ret = {} 881 # could be a job for inject but it's slow and I don't mind the extra loc 882 rawsites.each_pair do |backtrace, count| 883 ret[CallSite.new(backtrace)] = count 884 end 885 ret 886 end 887 888 # Returns a DefSite object corresponding to the given method 889 # Can be called in two ways: 890 # analyzer.defsite("Foo#f1") # instance method 891 # analyzer.defsite("Foo.g1") # singleton method of the class 892 # or 893 # analyzer.defsite("Foo", "f1") 894 # analyzer.defsite("#<class:Foo>", "g1") 895 def defsite(classname_or_fullname, methodname = nil) 896 file, line = raw_data_relative[1][expand_name(classname_or_fullname, methodname)] 897 return nil unless file && line 898 DefSite.new(file, line) 899 end 900 901 private 902 903 def expand_name(classname_or_fullname, methodname = nil) 904 if methodname.nil? 905 case classname_or_fullname 906 when /(.*)#(.*)/: classname, methodname = $1, $2 907 when /(.*)\.(.*)/: classname, methodname = "#<Class:#{$1}>", $2 908 else 909 raise ArgumentError, "Incorrect method name" 910 end 911 912 return [classname, methodname] 913 end 914 915 [classname_or_fullname, methodname] 916 end 917 918 def data_default; [{}, {}] end 919 920 def raw_data_absolute 921 raw, method_def_site = RCOV__.generate_callsite_info 922 ret1 = {} 923 ret2 = {} 924 raw.each_pair do |(klass, method), hash| 925 begin 926 key = [klass.to_s, method.to_s] 927 ret1[key] = hash.clone #Marshal.load(Marshal.dump(hash)) 928 ret2[key] = method_def_site[[klass, method]] 929 #rescue Exception 930 end 931 end 932 933 [ret1, ret2] 934 end 935 936 def aggregate_data(aggregated_data, delta) 937 callsites1, defsites1 = aggregated_data 938 callsites2, defsites2 = delta 939 940 callsites2.each_pair do |(klass, method), hash| 941 dest_hash = (callsites1[[klass, method]] ||= {}) 942 hash.each_pair do |callsite, count| 943 dest_hash[callsite] ||= 0 944 dest_hash[callsite] += count 945 end 946 end 947 948 defsites1.update(defsites2) 949 end 950 951 def compute_raw_data_difference(first, last) 952 difference = {} 953 default = Hash.new(0) 954 955 callsites1, defsites1 = *first 956 callsites2, defsites2 = *last 957 958 callsites2.each_pair do |(klass, method), hash| 959 old_hash = callsites1[[klass, method]] || default 960 hash.each_pair do |callsite, count| 961 diff = hash[callsite] - (old_hash[callsite] || 0) 962 if diff > 0 963 difference[[klass, method]] ||= {} 964 difference[[klass, method]][callsite] = diff 965 end 966 end 967 end 968 969 [difference, defsites1.update(defsites2)] 970 end 971 972 end 973 974 end # Rcov 975 976 # vi: set sw=2:
Generated using the rcov code coverage analysis tool for Ruby version 0.8.0.