| Internet-Draft | BGP MPLS Namespaces | July 2023 |
| Vairavakkalai, et al. | Expires 11 January 2024 | [Page] |
The MPLS forwarding layer in a core network is a shared resource. The MPLS FIB at nodes in this layer contains labels that are dynamically allocated and locally significant at that node. These labels are scoped in context of the global loopback address. Let us call this the global MPLS namespace.¶
For some usecases like upstream label allocation, it is useful to create private MPLS namespaces (virtual MPLS FIB) over this shared MPLS forwarding layer. This allows installing deterministic label values in the private FIBs created at nodes participating in the private MPLS namespace, while preserving the "locally significant" nature of the underlying shared global MPLS FIB.¶
This document defines new address families (AFI: 16399, SAFI: 128, or 1) and associated signaling mechanisms to create and use MPLS forwarding contexts in a network. Some example use cases are also described.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119].¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 11 January 2024.¶
Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
The MPLS forwarding layer in a core network is a shared resource. The MPLS FIB at nodes in this layer contains labels that are dynamically allocated and locally significant at that node. These labels are scoped in context of the global loopback address. Let us call this the global MPLS namespace.¶
For some usecases like upstream label allocation, it is useful to create private MPLS namespaces (virtual MPLS FIB) over this shared MPLS forwarding layer. This allows installing deterministic label values in the private FIBs created at nodes participating in the private MPLS namespace, while preserving the "locally significant" nature of the underlying shared global MPLS FIB.¶
This document defines new address families (AFI: 16399, SAFI: 128, or 1) and associated signaling mechanisms to create and use MPLS forwarding contexts in a network.¶
The mechanism described in this document reuse [RFC4364] and [RFC8277] procedures to implement Upstream label allocation. The MPLS Namespace family uses BGP VPN style NLRI where the FEC is a MPLS Label, instead of IP prefix. The concepts of MPLS Context tables and upstream allocation are described in [RFC5331].¶
A BGP speakers participating in a private MPLS namespace creates instance of "MPLS forwarding context" FIB, which is identified using a "Context Protocol Nexthop (CPNH)". A Context label MAY be advertised for the Context Protocol Nexthop (CPNH) using a transport layer protocol or BGP family to other nodes.¶
LSR : Label Switch Router¶
PE : Provider Edge¶
SFH : Service Forwarding Helper¶
UHP : Ultimate Hop Pop¶
MPLS FIB : MPLS Forwarding table¶
NLRI: Network Layer Reachability Information¶
AFI: Address Family Identifier¶
SAFI: Subsequent Address Family Identifier¶
BN : Border Node¶
TN : Transport Node, P-router¶
PE : Provider Edge¶
BGP VPN : VPNs built using RFC4364 mechanisms¶
BGP LU: BGP Labeled Unicast family (AFI/SAFIs 1/4, 2/4)¶
BGP CT: BGP Classful Transport family (AFI/SAFIs, 1/76, 2/76)¶
RT : Route-Target extended community¶
RD : Route-Distinguisher¶
VRF: Virtual Router Forwarding Table¶
PNH : Protocol Next hop address carried in a BGP Update message¶
CPNH: Context Protocol Nexthop¶
MNH : BGP MultiNexthop attribute¶
FEC : Forwarding Equivalence Class¶
RSVP-TE : Resource Reservation Protocol - Traffic Engineering¶
SEP : Service Endpoint, the PNH of a Service route¶
MPLS: Multi Protocol Label Switching¶
VNF : Virtual Network Function¶
vCP : VNF Control Plane¶
vFP : VNF Forwarding Plane¶
PLSR: a BGP CT or BGP LU transit node in a private MPLS plane, that does label-swap forwarding for Context label.¶
PLER: an edge node in a private MPLS plane. It has a forwarding context for private labels.¶
Global MPLS FIB : Global MPLS Forwarding table, to which shared-interfaces are connected¶
Private MPLS FIB : Private MPLS Forwarding table, to which private interfaces are connected¶
Private MPLS FIB Layer (Private MPLS plane): The group of Private MPLS FIBs in the network, connected together via Context labels¶
Context label : Locally-significant Non-reserved label pointing to a private MPLS FIB¶
Context nexthop IP-address (CPNH) : An IP-address that identifies the "Private MPLS FIB Layer". RD:CPNH identifies a Private MPLS FIB at a specific BGP node.¶
Global nexthop IP-address (GPNH) : Global Protocol Nexthop address. E.g. a loopback address used as transport tunnel end-point.¶
Detour-router : A BGP border node that is used as a loose-hop in a traffic-engineered path¶
Service Family : BGP address family used for advertising routes for "data traffic" as opposed to tunnels (e.g. AFI/SAFIs 1/1 or 1/128).¶
Transport Family : BGP address family used for advertising tunnels, which are in turn used by service routes for resolution (e.g. AFI/SAFIs 1/4 or 1/76).¶
A provider's core network consists of a global-domain (default forwarding-tables in P and PE nodes) that is shared by all tenants in the network and may also contain multiple private user-domains (e.g. VRF route tables).¶
The global MPLS forwarding-layer can be viewed as the collection of all default MPLS forwarding-tables. This global MPLS Fib layer contains labels locally significant to each node. The "local-significance of labels" gives the nodes freedom to participate in MPLS-forwarding with whatever label-ranges they can support in forwarding hardware.¶
In emerging usecases some applications using the MPLS-network may benefit from a "static labels" view of the MPLS-network. In some other usecases, a standard mechanism to do Upstream label-allocation is beneficial.¶
It is desirable to leave the global MPLS FIB layer intact, and build private MPLS FIB-layers on top of it to achieve these requirements. The private MPLS FIBs can then be used by the applications as desired. The private MPLS FIBs need to be created only at the nodes in the network where predictable label-values (external label allocation) is desired. E.g. BNs that need to act as a "Detour-nodes" or "Service-Forwarding-Helpers" that need to mirror service-labels.¶
In other words, provisioning of these private MPLS FIBs can be gradual and can co-exist with nodes not supporting the feature described in this document. These private MPLS FIBs can be stitched together using either the Context labels over the existing shared MPLS-network tunnels, or 'private' context-interfaces - to form the "private MPLS FIB layer".¶
An application can then install the routes with desired label-values in the private forwarding contexts with desired forwarding-semantics.¶
The building-blocks that construct a private MPLS plane are described in this section.¶
A private MPLS plane (just "MPLS plane" here-after) is identified by an IP-address called Context Protocol Nexthop (CPNH). This address is unique in the core-network, like any other loopback address.¶
A loopback-address uniquely identifies a specific node in the network, and we call it Global Protocol Nexthop (GPNH) in this document. The CPNH address uniquely identifies a MPLS plane, aka "MPLS Namespace".¶
Each node that has forwarding context for a MPLS plane MUST be configured with the same CPNH but a different RD, such that the RD:CPNH will uniquely identify that node in the MPLS plane.¶
An instance of a MPLS forwarding-table at a node in the private MPLS plane. This Private MPLS FIB contains the private label routes.¶
A node can have context FIB for multiple MPLS planes. The same label-value can have a different forwarding-semantic in each MPLS plane. Thus the applications using that MPLS plane get a deterministic label-value independent of other applications using other MPLS planes.¶
The terms "MPLS Namespace", "MPLS FIB-layer" and "MPLS plane" are used interchangeably in this document.¶
A Context label is a non-reserved dynamically allocated label, that is installed in the global MPLS FIB, and points to a MPLS-context FIB. The Context Label have forwarding semantics as follows in the global MPLS FIB:¶
Context Label -> Pop and Lookup in MPLS-context FIB¶
Advertising the "context label in conjunction with the GPNH" tells the network how to reach a "RD:CPNH".¶
The node roles in a MPLS plane can be classified into "edge nodes" (call them PLER) or "transit-nodes" (call them PLSR).¶
Private Label Edge-routers (PLER) have MPLS context FIB that belong to the MPLS plane. They advertise the presence of this context FIB using transport layer address families like BGP CT (SAFI 76) or BGP LU (SAFI 4), and private label routes from this FIB are advertused using new BGP AFI/SAFI described in this document.¶
These are just Border-nodes that do label-swap forwarding for the context labels they see in the Context-Protocol-Nexthop advertisement routes (BGP CT or BGP LU) going thru them. They basically stitch/extend the label switched path to a PLER's CPNH when they re-advertise the CPNH routes with next hop as self.¶
PLSRs dont have MPLS context FIBs. PLSRs dont have Context Protocol-Nexthop. Because they dont have Private label routes to originate.¶
However a node in the network can play both roles, of PLER and PLSR.¶
At a PLER, MPLS-traffic arriving with private label hits the correct private MPLS FIB by virtue of either arriving on a "private network-interface" that is attached to the MPLS context FIB, or arriving with a "Context label" on a network-interface attached to the global MPLS FIB.¶
To send data traffic into this private MPLS plane, the sender MUST use as handle either a "Context label" advertised by a node or a "Private interface" owned by the MPLS context FIB at the node. The MPLS context FIB is created for an application that needs a private MPLS plane.¶
The Context label is the only dynamic label-value the application needs to learn from the network (PLER node it is connected to), to be able to use the private MPLS plane. The application can chose predictable value for the labels to be programmed in the private MPLS FIBs.¶
Once the packet enters the private MPLS plane at an edge-node (PLER), the node will forward the packet to the next node (PLSR or PLER), by pushing the Context label advertised by that next-node, and the transport-label to reach that node's GPNH. This will repeat until the packet reaches the PLER's private MPLS FIB that originated that private MPLS-label.¶
At each PLER in the MPLS plane, the private label value remains the same, and points towards the same resource attached to the MPLS plane. This allows the applications using the MPLS-network a static-labels view of the resourses attached to the private MPLS plane.¶
At each PLSR in the MPLS plane, the Context label value will change (be swapped in forwarding), but is transparent to the application.¶
This section describes the new constructs defined by this document.¶
This document defines a new AFI: "MPLS Namespaces" (IANA code 16399). And two new address-families, using SAFIs 128 and 1. These address families are used to signal MPLS namespaces in BGP. To send or receive routes of these address families, these AFI, SAFI pair of values MUST be negotiated in Multiprotocol Extensions capability described in RFC4760 [RFC4760]¶
This address-family is used to exchange private label-routes in private MPLS FIBs at routers that are connected using a common network interface. The private label route has NLRI prefix format "RD:PrivateLabel" and contains Route-Target extended-community identifying the private FIB Layer (VPN) the route belongs to. The nexthop of these routes is set to either the GPNH or the CPNH of the BGP-speaker advertising the RFC-8277 label.¶
Any transport layer protocol is used to advertise the Context label that the receiving router uses to send traffic into the private MPLS FIB. The Context label installed in the global MPLS FIB points to the private MPLS FIB. The Context label is required when the connecting-interface is a shared common interface that terminates into the global MPLS FIB.¶
Routes of this address-family can be sent with either IPv4 or IPv6 nexthop. The type of nexthop is inferred from the length of the nexthop.¶
When the length of Next Hop Address field is 24 (or 48) the nexthop address is of type VPN-IPv6 with 8-octet RD set to zero (potentially followed by the link-local VPN-IPv6 address of the next hop with an 8-octet RD).¶
When the length of Next Hop Address field is 12 the nexthop address is of type VPN-IPv4 with 8-octet RD.¶
This address-family is used to exchange private label-routes in private MPLS FIBs to routers that are connected using a private network-interface.¶
Because the interface is private, and terminates directly into the private MPLS FIB, a Context label is not required to access the private MPLS FIB and NLRI prefix format is just "PrivateLabel/24", without the RD.¶
Routes of this address-family can be sent with either IPv4 or IPv6 nexthop. The type of nexthop is inferred from the length of the nexthop.¶
When the length of Next Hop Address field is 16 (or 32) the nexthop address is of type IPv6 (potentially followed by the link-local IPv6 address of the next hop).¶
When the length of Next Hop Address field is 4 the nexthop address is a 4 octet IPv4 address.¶
The Context-NH discovery route may be a BGP LU or [BGP-CT] family route that carries CPNH in the "Prefix" portion of the NLRI. And the Context label is carried in the "Label" field in the [RFC8277] format NLRI.¶
This route is advertised with the following path-attributes:¶
The "Context-Nexthop discovery route" is originated by each speaker who acts as a PLER. The "RD:Context-nexthop" uniquely identifies the private MPLS FIB at the speaker. The "Context-nexthop address" uniquely identifies the private MPLS plane in the network. The Context label advertised in this route has a local forwarding semantic of "Pop, Lookup in Private MPLS FIB".¶
A BGP speaker readvertising a BGP CT Context-Nexthop for RD:CPNH discovery-route MUST follow the mechanisms described in [BGP-CT]. Specifically when re-advertising with "next-hop self" MUST allocate a new Label with a forwarding semantic of "Swap Received-Context-Label, Forward to Received-GPNH". This extends reachability to the CPNH across tunnel domains.¶
The Private Label routes are carried in the new address-family "MPLS VpnUnicast" (AFI:16399, SAFI:128) aka "MPLS namespace signaling", defined in this document.¶
The NLRI format follows the specifications in [RFC8277], with the "Prefix" portion of the NLRI comprising of the RD and "Private MPLS Label" encoded as shown below.¶
In a MP_REACH_NLRI attribute whose AFI/SAFI is MPLS/128, the "Length" field will be 112 bits or less, comprising of the Label, RD and "Private MPLS Label".¶
In a MP_REACH_NLRI attribute whose AFI/SAFI is MPLS/1, the "Length" field will be 48 bits or less, comprising of the Label, and "Private MPLS Label".¶
NLRI Prefix (Private Label route, AFI:16399, SAFI:128)¶
This picture shows NLRI format when the RFC-8277 Multiple Labels
Capability is not used:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Length | Label |Rsrv |S|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Route Distinguisher (RD) (8 octets) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Route Distinguisher (RD cont.) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Private MPLS Label |Rsrv |S|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Fig 1: RFC-8277 NLRI with one Label.
- Length:
The Length field consists of a single octet. It specifies the
length in bits of the remainder of the NLRI field.
In a MP_REACH_NLRI attribute whose AFI/SAFI is MPLS/128, the
"Length" field will be 112 bits or less, comprising of the
Label, RD and "Private MPLS Label".
As specified in [RFC4760], the actual length of the NLRI field
will be the number of bits specified in the Length field,
rounded up to the nearest integral number of octets.
- Label:
The Label field is a 20-bit field containing an MPLS label value
(see [RFC3032]). This label is locally significant, downstream
allocated at the speaker identified in the BGP Nexthop field
in MP_REACH_NLRI (code 14). This label is pushed in nexthop of
the route installed in MPLS context FIB at receiving router.
- Route Distinguisher (RD):
The 8 byte Route Distinguisher as specified in [RFC4760].
- Private MPLS Label:
The "Private MPLS Label" field is a 20-bit field containing an
MPLS label value (see [RFC3032]). This is an upstream assigned
MPLS label, used as destination of route installed in MPLS
context FIB at the receiving router.
- Rsrv:
This 3-bit field SHOULD be set to zero on transmission and
MUST be ignored on reception.
- S:
This 1-bit field MUST be set to one on transmission and MUST
be ignored on reception.
¶
Attributes on this route:¶
The MultiNextHop attribute [MULTI-NH] with forwarding-semantic:¶
MultiNexthop BGP-attribute (Private Label route)¶
+--------------------------------------------+
| MultiNH.Num-Nexthops = 1 |
+--------------------------------------------+
| FwdSemanticsTLV.FwdAction = Forward |
+--------------------------------------------+
| NHDescrTLV.NhopDescrType = RD:CPNH or GPNH|
+--------------------------------------------+
Fig 2: MultiNexthop attr of Private Label route
¶
A speaker MAY readvertise a private label route without changing the Nexthop (RD:CPNH) carried in it, if the speaker is a pure PLSR.¶
If it does alter the nexthop to SelfRD:CPNH, it SHOULD act as a PLER, and for e.g. originate a "Context-Nexthop discovery route" for prefix "SelfRD:CPNH".¶
Even if the speaker sets nexthop-address to Self because of regular BGP readvertisement-rules, Label Prefix MUST NOT be altered, and the received NLRI "RD:Private-Label1" MUST be re-advertised as-is. Such that value of label "Private-Label1" doesn't change while the packet traverses multiple nodes in the private MPLS FIB layer.¶
The Route target attached to the route is the one identifying the private MPLS FIB layer (VPN). The Private label routes resolve over the Context-nexthop route that belong to the same VPN.¶
A node receiving a "Private Label route" RD:L1 MUST install the label L1 in the private MPLS Forwarding-context idenfied by the Route-Target attached to the route.¶
The label route MUST be installed with forwarding-semantic as specified in the received MultiNextHop attribute. As an example, a Detour node MAY receive the private label route with a forwarding-semantic of "Forward to RD:CPNH" operation. And an Egress node MAY receive a private label route with a forwarding-semantic pointing to a resource it houses. Note that such a Private label BGP route MAY be received from external-application also.¶
A node receiving a "Context-nexthop discovery route" MUST be capable of using either the CPNH or the RD:CPNH carried in the NLRI, to resolve other routes received with this CPNH address or RD:CPNH in the "Nexthop-attributes".¶
The receiver of a private label route MUST recursively resolve the received nexthop (RD:CPNH) over the Context-Nexthop discovery-route for prefix "RD:CPNH" to determine the label stack "Context Label, Transport Label" to push, so that the MPLS packet with private label reaches the private MPLS FIB originating the route.¶
If a node receives multiple "Context-nexthop discovery route" for a CPNH, it SHOULD run path-selection after stripping the RD, to find the closest ingress to the private MPLS plane identified by the CPNH. This best path SHOULD be used to resolve a received private label route.¶
In certain deployments, some domains of an Inter AS Option C network may be located in an untrusted geography. Even though such domains are administered by the same operator, employing security mechanisms may be desirable on interfaces connecting such domains.¶
This section describes how an Inter domain Option C MPLS network can be protected against Label spoofing, using MPLS Namespaces technology.¶
The inter-AS labeled traffic will be protected against spoofing, such that the transport ASBRs will accept labeled traffic on inter-AS links only if the MPLS label stack matches the transport and service MPLS labels that have been advertised in BGP (LU and L3VPN) families to the peers in untrusted zone.¶
In order to achieve this security, new functionality is required on only the BNs, PEs or RRs in the trusted zone.¶
This section illustrates the mechanisms using BGP LU as transport family and L3VPN as service family. But the mechanisms described will work in similar manner for other labeled transport families (e.g., BGP CT) and service families (e.g., L3VPNv6, EVPN, VPLS) as-well.¶
[RR13] [RR23]
| |
| |
[PE11]\ | /[ASBR14]------[ASBR24]\ | /[PE21]
\ | / \ | /
[P11] [P21]
/ \ / \
.. / \[ASBR15]------[ASBR25]/ \
[PE12] [PE22]
|
..AS1.. | ..AS2..
(trusted zone) | (untrusted zone)
<---- Traffic Direction ----
Figure 1 shows an Inter-AS Option C network with two domains. AS1 is in a trusted geography, and AS2 is in an untrusted geography.¶
BGP LU (AFI/SAFI: 1/4) is negotiated on EBGP sessions between ASBR14 - ASBR24 and ASBR15 - ASBR25. BGP LU is also negotiated on IBGP sessions in AS1 between RR13 and the nodes PE11, PE12, ASBR13, and ASBR14; also in AS2 between RR23 and the nodes PE21, PE22, ASBR24, and ASBR25. The ASBRs readvertise the BGP LU routes rewriting next hop to self. The RRs readvertise the BGP LU routes with the next hop unchanged.¶
L3VPN Service routes are present only at PEs and RRs in the two ASes. L3VPN family (AFI/SAFI: 1/128) is negotiated between PE11, PE12 and RR13. RR13 has multihop EBGP peering with RR23 and negotiates AFI/SAFI: 1/128. RR23 further peers with PE21, PE22 in AS2. The RRs readvertise the L3VPN service routes with next hop unchanged.¶
In this example loopback addresses of all PEs in one AS are reachable via BGP LU to the other AS.¶
Following sections describe the control plane and forwarding plane mechanics to deploy label spoofing protection using MPLS Namespaces in this network.¶
Traffic direction being described is AS2 to AS1, since focus is on traffic entering a trusted zone from an untrusted zone.¶
At ASBR14 and ASBR15, the interfaces connecting to the BGP peers in untrusted zone are provisioned to terminate in a separate MPLS Namespace, lets call it "From-AS2" namespace. It identifies traffic that is allowed from AS2. This namespace contains a distinct MPLS FIB, which is different from the global MPLS FIB. MPLS packets received on these interfaces are forwarded based on lookup in this MPLS FIB.¶
ASBR14 and ASBR15 advertise BGP LU routes for PE11, PE12 loopbacks to peers in AS2 with next hop self. Routes for the labels advertised in these routes are installed in the "From-AS2" MPLS namespace. Thus, MPLS packets received on these interfaces will be accepted only if the outermost label is installed in this MPLS namespace FIB. Packets with unknown labels will be discarded.¶
This provides spoof protection for the transport labels advertised in BGP LU.¶
The border nodes ASBR14 and ASBR15 use UHP labels in BGP LU routes when advertising a AS1 PE loopback to neighbors in AS2. This label serves as Context Label that identifies traffic sent by AS2 towards that PE in AS1.¶
The route for Context Label advertised to AS2 neighbors is installed in the "From-AS2" MPLS namespace FIB. This route is installed with a nexthop which has the forwarding semantic as "Pop, Lookup in MPLS-namespace for the PE".¶
In this manner, the incoming MPLS traffic is validated against the outermost label to match an advertised PE label, and then sent for futher processing in context of the corresponding PE MPLS namespace.¶
At ASBR14 and ASBR15, a separate MPLS Namespace is created for PE11 and PE12. Lets call them "To-PE1" and "To-PE2" namespaces.¶
The namespace "To-PE11" identifies traffic direction towards PE11. MPLS packets destined towards PE11 are forwarded based on lookup in this MPLS namespace FIB.¶
The namespace "To-PE12" identifies traffic direction towards PE12. MPLS packets destined towards PE12 are forwarded based on lookup in this MPLS namespace FIB.¶
Packets are directed to these namespaces after being processed in the "From-AS2" MPLS namespace FIB.¶
Correspondingly, MPLS Namespaces "To-PE11" and "To-PE12" are created at RR13 which acts as an external label allocator for these namespaces at these ASBRs. The namespace To-PE11 has an associated Route Target RT-PE11. The namespace To-PE12 has an associated Route Target RT-PE12. These Route Targets are exported by the RR and imported by the ASBRs.¶
In AS1, the route reflector RR13 negotiates MPLS Namespace Signaling family (AFI/SAFI: 16399/128) with the border nodes ASBR14 and ASBR15.¶
Using the MPLS namespace signaling family, the RR13 insalls the VPN service labels advertised by PE11 and PE12 into their corresponding namespaces at the ASBRs.¶
Consider PE11 advertising to RR13 a VPN prefix RD:Pfx1 with VPN label VL1, next hop as PE11. RR13 advertises this route with next hop and label unchanged to RR23. When doing so, RR13 originates a MPLS namespace signaling family (AFI/SAFI: 16399/128) route with NLRI RDx:VL1, next hop as PE11, label field containing VL1, and the Route Target RT-PE11.¶
ASBR14 receives this route and installs in the "To-PE11" MPLS namespace FIB, based on matching import route target RT-PE11. The received next hop PE11 is resolved to map to available tunnel from ASBR14 to PE11. The MPLS route for label VL1 is installed to the "To-PE11" MPLS namespace FIB. This ensures that packets sent by AS2 with VPN label as VL1 will be forwarded properly to PE11. But if an unknown inner label was sent by AS2, such a packet will be dropped after lookup in "To-PE11" MPLS FIB.¶
Similar mechanism works for labels advertised by PE12, using "To-PE12" MPLS namespace RIB and FIB at RR and ASBRs.¶
In this manner, protection is provided against nodes in AS2 spoofing service label also.¶
These mechanisms can be used in Inter-AS Option B scenarios as-well. In such cases, the procedures specified in Section 6.1.2.1 are applied to L3VPN family routes instead of BGP LU routes. MPLS namespace signaling family (AFI/SAFI: 16399/128) is not used in this case.¶
In Inter-AS Option B scenarios, ASBR14 and ASBR15 re-advertise BGP L3VPN (AFI/SAFI: 1/128) routes from PE11, PE12 to peers in AS2 with next hop self. Routes for the labels advertised in these routes are installed in the "From-AS2" MPLS namespace. Thus, MPLS packets received on these interfaces will be accepted only if the outermost label is installed in this MPLS namespace FIB. Packets with unknown labels will be discarded.¶
This provides spoof protection for the L3VPN service labels advertised in BGP L3VPN (AFI/SAFI: 1/128) family.¶
MPLS Namespaces can be used to improve scaling and convergence properties of a scaled BGP MPLS network. It acts like a Mezanine transport layer that decouples the service layer from the actual transport layer.¶
Typically service routes in a MPLS network bind to the following entities that identify point-of-presence of a service:¶
In such a model, whenever a PE is taken out of service the GPNH changes, and Service-Label changes - which makes maintenance a heavy convergence event. Because the service routes with massive-scale need to be readvertised with new service-label or PE-address.¶
An alternate model could be: to advertise the service routes with a protocol-nexthop of CPNH (without RD), with a forwarding-semantic of:¶
This model fully decouples the service-layer from the transport-layer identifiers, by making the Service routes refer to the CPNH and Private Labels. Thus the underlying transport layer can change (nodes representing a Private label can be added or removed) without any changes to the service routes. Which present good scaling properties for the network.¶
Appendix D in [BGP-CT] illustrates how scaling is achieved in a large Inter domain MPLS network by using MPLS Namespaces.¶
This model also allows anycast traffic forwarding to any resource in the network. Multiple PEs can advertise the same Private label to identify a specific service (e.g. peering with an AS) they are offering.¶
Once the service route traffic enters the private FIB layer, at the closest entry-point determined by path-selection of CPNH auto-discovery routes; then the Private Labels (with pre determined values) pushed will determine the loose hop path taken by the traffic and also the destination-resource.¶
In a virtualized environment a Service PE node (that comprises of a vCP and multiple vFPs) can mirror MPLS labels (GL1) in its global MPLS FIB to a private forwarding context at an upstream node (SFH) with information on which vFPs are optimal exit-points for that label. Such that the SFH can optimally forward traffic to GL1 to the right vFPs, thus avoiding intra fabric traffic hops.¶
To do this, the service PE advertises a private label route with RD:GL1 to the SFH node. The route is advertised with a MultiNextHop attribute with one or more legs that have a "Forward to SEPx" semantics. Where SEPx is one of many exit-points at the Service-PE node.¶
This mechanism facilitates predictable (external allocator) label values, using a standard BGP family as the API. This gives the external applications a separate MPLS FIB to play with, totally separate from other applications.¶
This also avoids vendor specific API dependencies between external label allocators (e.g., Controller software), and network routers.¶
This mechanism also increases the overal MPLS label space available in the network. Because it creates per application label forwarding contexts (namespaces), instead of reserving ranges and splitting the global MPLS FIB among various applications.¶
MPLS namespaces provide an ingress PE the ability to steer MPLS traffic thru specific detour loose hop nodes using predictable label stack.¶
Labels in a MPLS namespace may be used to identify service chain hops, thus allowing to create a Service Chain consisting of multiple service functions.¶
Allows private MPLS label usage to spread across multiple domains(e.g., ASes) and works seamlessly with existing technologies like Inter-AS VPN option C.¶
This document makes following requests of IANA.¶
New BGP AFI code ("Address Family Numbers" registry):¶
Note to RFC Editor: this section may be removed on publication as an RFC.¶
Using separate mpls forwarding contexts for separate applications and stitching them into separate MPLS planes increases the security attributes of the MPLS network.¶
The authors thank Jeffrey (Zhaohui) Zhang, Ron Bonica, Jeff Haas, John Scudder, Jim Uttaro, Israel Means, Torunn Narvestad, Christian Graf, Natarajan Venkataraman, Reshma Das and Aravind Srinivas Srinivasa Prabhakar for the valuable discussions and feedback.¶