NAME Alter - *Alter Ego* Objects Synopsis package MyClass; use Alter ego => {}; # Alter ego of type hash # Put data in it my $obj = \ do { my $o }; ego( $obj)->{a} = 1; ego( $obj)->{b} = 2; # Retrieve it again print ego( $obj)->{ b}, "\n"; # prints 2 package OtherClass; defined( ego $obj) or die; # dies, OtherClass hasn't set an alter ego # Direct access to the corona of alter egos my $crown = Alter::corona $obj; Functions Basic Functions The functions described here accept a first argument named $obj. Despite the name, $obj can be any reference, it doesn't *have* to be blessed (though it usually will be). It is a fatal error if it is not a reference or if the reference points to a read-only value. "ego($obj)" Retrieves the class-specific *alter ego* assigned to $obj by "alter()" or by autovivification if that is enabled. If neither is the case, an undefined value is returned. The class is the package into which the call to "ego()" is compiled. "alter($obj, $val)" Assigns $val to the reference $obj as an *alter ego* for the caller's class. The class is the package into which the call to "alter" is compiled. Returns $obj (*not* the value assigned). "Alter::corona( $obj)" Direct access to the *corona* of *alter ego*'s of $obj. The corona is a hash keyed by class name in which the alter ego's of an object are stored. Unlike "alter()" and "ego()", this function is not caller-sensitive. Returns a reference to the corona hash, which is created if necessary. This function is not exported, if needed it must be called fully qualified. "Alter::is_xs" Returns a true value if the XS implementation of "Alter" is active, false if the pure Perl fallback is in place. Autovivification You can set one of the types "SCALAR", "ARRAY", "HASH" or "GLOB" for autovivification of the alter ego. This is done by specifying the type in a "use" statement, as in package MyClass; use Alter 'ARRAY'; If the "ego()" function is later called from "MyClass" before an alter ego has been specified using "alter()", a new *array reference* will be created and returned. Autovivification happens only once per class and object. (You would have to delete the class entry from the object's corona to make it happen again.) The type specification can also be a referece of the appropriate type, so "[]" can be used for "ARRAY" and "{}" for "HASH" (globrefs and scalar refs can also be used, but are less attractive). Type specification can be combined with function imports. Thus package MyClass; use Alter ego => {}; imports the "ego()" function and specifies a hash tape for autovivification. With autovivification you will usually not need to import the "alter" function at all. Specifying "NOAUTO" in place of a type specification switches autovivification off for the current class. This is also the default. Serialization Support Serialization is supported for human inspection in "Data::Dumper" style and for disk storage and cloning in "Storable" style. For "Data::Dumper" support "Alter" provides the class "Alter::Dumper" for use as a base class, which contains the single method "Dumper". "Dumper" returns a string that represents a hash in "Data::Dumper" format. The hash shows all *alter ego*s that have been created for the object, keyed by class. An additional key "(body)" (which can't be a class name) holds the actual body of the object. Formatting- and other options of "Data::Dumper" will change the appearance of the dump string, with the exception of $Data::Dumper::Purity, which will always be 1. "Dumper" can also be imported from "Alter" directly. Note that "eval()"-ing a dump string will *not* restore the object, but rather create a hash as described. Re-creation of an object is only available through "Storable". For "Storable" support the class "Alter::Storable" is provided with the methods "STORABLE_freeze", "STORABLE_thaw" and "STORABLE_attach". The three functions are also exported by "Alter" Their interaction with "Storable" is described there. Inheriting these methods allows "Storable"'s own functions "freeze()" and "thaw()" to save and restore an object's *alter ego*s along with the actual object body. Other "Storable" functions, like "store", "nstore", "retrieve", etc. also become Alter-aware. There is one exception. "Storable::dclone" cannot be used on "Alter"-based objects. To clone an "Alter"-based object, "Storable::thaw(Storable::freeze($obj)" must be called explicitly. Per default, both "Alter::Dumper" and "Alter::Storable" are made base classes of the current class (if necessary) by "use Alter". If the function "Dumper" is imported, or if "-dumper" is specified, "Alter::Dumper" is not made a base class. If any of the functions "STORABLE_freeze", "STORABLE_thaw" or "STORABLE_attach" is imported, or if "-storable" is specified, "Alter::Storable" is not made a base class. Fallback Perl Implementation "Alter" is properly an XS module and a suitable C compiler is required to build it. If compilation isn't possible, the XS part is replaced with a *pure Perl* implementation "Alter::AlterXS_in_perl". That happens automatically at load time when loading the XS part fails. The boolean function "Alter::is_xs" tells (in the obvious way) which implementation is active. If, for some reason, you want to run the Perl fallback when the XS version is available, set the environment variable "PERL_ALTER_NO_XS" to a true value before "Alter" is loaded. This fallback is not a full replacement for the XS implementation. Besides being markedly slower, it lacks key features in that it is *not* automatically garbage-collected and *not* thread-safe. Instead, "Alter::AlterXS_in_perl" provides a "CLONE" method for thread safety and a universal destructor "Alter::Destructor::DESTROY" for garbage collection. A class that uses the pure Perl implementation of "Alter" will obtain this destructor through inheritance (unless "-destroy" is specified with the "use" statement). So at the surface thread-safety and garbage-collection are retained. However, if you want to add your own destructor to a class, you must make sure that both (all) destructors are called as needed. Perl only calls the first one it meets on the @ISA tree and that's it. Otherwise the fallback implementation works like the original. If compilation has problems, it should allow you to run test cases to help decide if it's worth trying. To make sure that production code doesn't inadvertently run with the Perl implementation Alter::is_xs or die "XS implementation of Alter required"; can be used. Exports None by default, "alter()" and "ego()" upon request. Further available are "STORABLE_freeze", "STORABLE_thaw" and "STORABLE_attach" as well as "Dumper". ":all" imports all these functions. Environment The environment variable "PERL_ALTER_NO_XS" is inspected once at load time to decide whether to load the XS version of "Alter" or the pure Perl fallback. At run time it has no effect. Description The "Alter" module is meant to facilitate the creation of classes that support *black-box inheritance*, which is to say that an "Alter" based class can be a parent class for *any other* class, whether itself "Alter" based or not. Inside-out classes also have that property. "Alter" is thus an alternative to the *inside-out* technique of class construction. In some respects, "Alter" objects are easier to handle. Alter objects support the same data model as traditional Perl objects. To each class, an Alter object presents an arbitrary reference, the object's *alter ego*. The type of reference and how it is used are the entirely the class's business. In particular, the common practice of using a hash whose keys represent object fields still applies, only each class sees its individual hash. "Alter" based objects are garbage-collected and thread-safe without additional measures. "Alter" also supports "Data::Dumper" and "Storable" in a generic way, so that "Alter" based objects can be easily be viewed and made persistent (within the limitations of the respective modules). "Alter" works by giving every object a class-specific *alter ego*, which can be any scalar, for its (the classe's) specific needs for data storage. The alter ego is set by the "alter()" function (or by autovivification), usually once per class and object at initialization time. It is retrieved by the "ego()" function in terms of which a class will define its accessors. That works by magically (in the technical sense of "PERL_MAGIC_ext") assigning a hash keyed by classname, the *corona*, to every object that takes part in the game. The corona holds the individual alter ego's for each class. It is created when needed and stays with an object for its lifetime. It is subject to garbage collection when the object goes out of scope. Normally the corona is invisible to the user, but the "Alter::corona()" function (not exported) allows direct access if needed. Example The example first shows how a class "Name" is built from two classes "First" and "Last" which implement the first and last names separately. "First" treats its objects as hashes whereas "Last" uses them as arrays. Nevertheless, the code in "Name" that joins the two classes via subclassing is straightforward. The second part of the example shows that "Alter" classes actually support black-box inheritance. Here, we use an object of class "IO::File" as the "carrier" object. This must be a globref to work. This object can be initialized to the class "Name", which in part sees it as a hash, in another part as an array. Methods of both classes now work on the object. #!/usr/local/bin/perl use strict; use warnings; $| = 1; # Show that class Name works my $prof = Name->new( qw( Albert Einstein)); print $prof->fname, "\n"; print $prof->lname, "\n"; print $prof->name, "\n"; # Share an object with a foreign class { package Named::Handle; use base 'IO::File'; push our @ISA, qw( Name); sub new { my $class = shift; my ( $file, $first, $last) = @_; $class->IO::File::new( $file)->init( $first, $last); } sub init { my $nh = shift; $nh->Name::init( @_); } } my $nh = Named::Handle->new( '/dev/null', 'Bit', 'Bucket'); print "okay, at eof\n" if $nh->eof; # IO::File methods work print $nh->name, "\n"; # ...as do Name methods exit; ####################################################################### { package First; use Alter qw( alter ego); sub new { my $class = shift; bless( \ my $o, $class)->init( @_); } sub init { my $f = shift; alter $f, { name => shift }; $f; } sub fname { my $h = ego shift; @_ ? $h->{ name} = shift : $h->{ name}; } } { package Last; use Alter qw( alter ego); sub new { my $class = shift; bless( \ my $o, $class)->init( @_); } sub init { my $l = shift; alter $l, [ shift]; $l; } sub lname { my $l = ego( shift); @_ ? $l->[ 0] = shift : $l->[ 0]; } } { package Name; use base 'First'; use base 'Last'; sub init { my $n = shift; $n->First::init( shift); $n->Last::init( shift); } sub name { my $n = shift; join ' ' => $n->fname, $n->lname; } } __END__ Thanks Thanks to Abigail who invented the inside-out technique, showhing *what* the problem is with Perl inheritance and *how* it could be overcome with just a little stroke of genius. Thanks also to Jerry Hedden for making me aware of the possibilities of "ext" magic on which this implementation of "Alter" is built. Author Anno Siegel, <anno4000@zrz.tu-berlin.de> COPYRIGHT AND LICENSE Copyright (C) 2007 by Anno Siegel This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself, either Perl version 5.8.7 or, at your option, any later version of Perl 5 you may have available.