Device-BCM2835 version 0.01 =========================== Perl wrapper for the bcm2835 library, allowing you to use perl to do low level IO on a bcm2835 and similar chips uas used in Raspberry Pi (RPi) family of single board computers. Supports all the functions provided in bcm2835 INSTALLATION To install this module type the following: perl Makefile.PL make make test make install DEPENDENCIES This module requires these other modules and libraries: Perl bcm2835 from http://www.airspayce.com/mikem/bcm2835/ Needs to be coimpiled and installed first: cd bcm2835 ./configure make make check make install Caution: if you get an error like: relocation R_X86_64_PC32 against symbol `bcm2835_peripherals' can not be used when making a shared object; recompile with -fPIC then you will need to build bcm2835 like this: cd bcm2835 ./configure CFLAGS=-fPIC CXXFLAGS=-fPIC make make check make install COPYRIGHT AND LICENCE Copyright (C) 2012 by Mike McCauley This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself, either Perl version 5.14.2 or, at your option, any later version of Perl 5 you may have available.